How to use the Recovery media for the TravelMate C100.
Press F2 to enter BIOS Setup during Power-On Self-Test (POST while the TravelMate logo is being displayed).
Select Startup Configuration and press Enter.
Refer to the on screen instructions to set the 1st device in Boot Drive Sequence to "CD-ROM".
Press the CD-ROM drive eject button and insert the System CD.
Close the CD-ROM tray.
Press ESC to return to the main screen, then press ESC (then Enter) to save the changes and reboot the system.
Select the HDD Full Rebuild.
Insert CD when prompted and follow on-screen the proper Recovery instructions to continue the process.
When you finish the recovery process, please remove the Recovery CD and insert the System CD again. After restarting computer, WIndows installation continues.
These are the same instructions included with the Recovery media, labeled "Recovery CD Installation Sheet".
